Engr.(Mrs) Mojisola Bolarinwa


 

 

 

 

 Mrs MBolarinwa|tech.ui.edu.ng|University of Ibadan

Mojisola   Aderenike BOLARINWA

Academic and Professional Qualifications

B.Sc.(Hons)(met & mat)(Ife), M.Sc (Ibadan)

 

Lecture II

 

Area of Specialisation

Industrial Engineering

 Office

Department of Industrial and Production Engineering, University of Ibadan, Nigeria.

 

Tel: + 234 – 803 940 6065

Download CV

 

Contact:

 

 

IX     RESEARCH         

 

(a)       RESEARCH COMPLETED

(i)          Fabrication of Battery terminal dies. (Joint project).

(ii)         Solving Urbanisation problems in Nigeria using Systems Dynamics approach. (Individual research).

(iii)        Anthropometric Measurement of Human Body Dimensions. (Individual research).

(iv)       Diurnal human height shrinkage measurement. (Individual research).

(v)        Modelling methods of: Operations Research; Linear Programming; Transportation Techniques; Assignment Techniques and Queuing Systems. (Individual research).

(vi)       Essentials of Material Requirement Planning (MRP 1) And Manufacturing Resource Planning (MRP 11) in Production and Inventory systems. (Individual research).

(vii)      Production of Enamels for Glass Decoration. (Individual research).

(viii)    Metallographic Study of the Bonding of       Red-Oxide Primer on various substrates using the Scanning Electron Microscope. (Individual research).

(ix)       Quality Characteristics of Basic hand tools sold in Nigeria. (Individual research).

(x)        Extraction and processing of a natural fibre (Plantain) from the parent stock for use as filler reinforcement in polyester composites. (Joint project).

(xi)       Synthesis of Polyester composites using polyester resin material, catalyst and an accelerator. (Joint project).

(xii)      Studies on the Effect of Cocoa pod as filler in Polyester Composites. (Joint project).

(xiii)    Effect of Cocoa pod Particle size Variation on the Mechanical Properties of Polyester Composites. (Joint project).

 

(b)       RESEARCH IN PROGRESS

(i)          Synthesis & Investigation of the Mechanical, Chemical & Microstructural behaviour of reinforced Glass Ceramics for dental restorations, using local contents. - Ph. D. research work.

(ii)         Extraction of Calcium phosphate from animal bones for use as hydroxyapatite in dental ceramics.

(iii)        Extraction of alumina from locally sourced aluminosilicate material.

(iv)       Extraction of Natural fibre (Bamboo) from parent stock for use as filler reinforcement in Polymeric materials. (Joint project). 

(v)        Effect of Saline surface treatment on the Mechanical properties of polyester composites. (Joint project).

 

(c)       DISSERTATION & THESIS

(i)          Quality Characteristics of Basic hand tools sold in Nigeria (M.Sc.2006) University of Ibadan, Ibadan.

(ii)         Metallographic Study of the Bonding of       Red-Oxide Primer on various substrates using the Scanning Electron Microscope (B.Sc.2001) Obafemi Awolowo University, Ile - Ife.

 

X       PUBLICATIONS

(i) Oyawale F.A. and Ogunmolati, M.A. Quality Characteristics of Basic Hand tools sold in Nigeria. Journal of Advanced Materials Research. Vols. 62 – 64. (2009). Pp 708 – 714) @ (2009) Trans Tech Publications, Switzerland.

        Online at http://www.scientific.net

    Online available  since 2009/Feb/20.

 

(ii)     Oyawale F.A. and Ogunmolati, M.A. Quality Characteristics of Basic Hand tools sold in Nigeria. April 2008 Proceedings for the 2nd International Conference for Engineering Research & Development    (ICER&D). Pp 578 – 588. (Journal publication is as appeared in (i) above).

 

(iii)        Ogunmolati, M.A.; Adetunji A.R and Adewoye O. O. SEM studies of Adhesion Property of Red oxide primer on selected metal substrates. NIMACON 2007 Proceedings for the 6th Annual Nigerian Materials Congress (NIMACON) of the Materials Society of Nigeria. Pp 60 – 64.

 

(iv)       Ogunmolati, M.A. and Adetunji A.R. Scanning Electron Microscopy Analysis of Coating Techniques of Selected Substrate Metals on Red oxide Primer. October 2007 Proceedings for the 24th Annual Conference of the Nigerian Metallurgical Society. Pp 149 – 154.

 

(v)        Bolarinwa, M. A. and Babatope, B. Studies on the Effect of Cocoa                 pod as Filler in Polyester Composites. NIMACON 2008 Proceedings       for the 7th Annual Nigerian Materials Congress (NIMACON) of the            Materials Society of Nigeria. Pp 122 – 131.       

 

(vi)   Bolarinwa, M. A., Adetunji, A. R. and Oyawale, F. A. Reliability    Analysis of some Selected Hand tools using Optical Microscopy Technique. October 2009 Proceedings for the 26th Annual Conference of the Nigerian Metallurgical Society. Pp 104 – 111.

 

(vii)  Bolarinwa, M. A., Adetunji, A. R., Anamu, U. S., Oyawale, F. A. and Adewoye, O. O.  -  Structural Characterization of a clay deposit in Ijero – Ekiti, Ekiti State, Nigeria for furnace lining. The published Book of Abstracts for the First North African Crystallographic Conference NACC1. Page 104.

 

(viii)            Bolarinwa, M. A. and Babatope, B. Effect of Cocoa Pod Particle Size Variation on the Mechanical Properties of Polyester Composites. Nigerian Materials Congress (NIMACON) & 5th International Conference of the African Materials Research Society (A - MRS) Proceedings for the year 2009.

(ix)    

 

 

     PAPERS SENT AND AWAITING FINAL JOURNAL PUBLICATIONS

(i)          Ogunmolati, M.A. and Adetunji A.R. Scanning Electron Microscopy Analysis of Coating Techniques of Selected Substrate Metals on Red oxide Primer. Already sent to the Research & Development Journal of the Nigerian Defence Headquarters, Abuja in May 2009 and its receival has been acknowledged.

 

(ii)         Ogunmolati, M.A.; Adetunji A.R and Adewoye O. O. SEM studies of Adhesion Property of Red oxide primer on selected metal substrates.

Already accepted in September 2011 after Peer – Review and correction for publication in the Journal of Advanced Materials, Switzerland.

 

(iii)        Bolarinwa, M. A. Magnetic property analysis for the classification of ferrous and non ferrous metals. An experiment designed for the Young Materials Scientists Club (YOMASC) in 2009 at Engineering Materials Development Institute (EMDI), Akure.

 

XI     CONFERENCES, WORKSHOPS & SEMINARS

 (a)       MAJOR CONFERENCES ATTENDED WITH PAPERS READ

(i)          Ogunmolati, M.A. - “Metallographic Study of the Bonding of Red-oxide primer on various substrates using the Scanning Electron                                              Microscope” - Nigerian Society Engineers graduate of the year competition. N.T.A. Ibadan. September 25th, 2006.

(ii)         Ogunmolati, M.A. and Adetunji A.R. – “Scanning Electron Microscopy analysis of coating techniques of selected substrate metals on red oxide primer” – presented at the 24th annual conference of the Nigerian Metallurgical Society on the 26th of Oct 2007 at Chelsea Hotel, Abuja.

 

(iii)        Ogunmolati, M.A.; Adetunji A.R and Adewoye O. O. – “SEM Studies of the Adhesion Property of Red oxide” – presented on the 16th of Nov. 2007 at the 6th annual conference of the Materials Society of Nigeria at the Centre for Energy, Obafemi Awolowo University – Ile Ife.

 

(iv)       Ogunmolati, M.A. and Oyawale F.A. – “Quality Characteristics of Basic Hand tools sold in Nigeria” - presented on the 15th April, 2008 at the 2nd International Conference on Engineering Research & Development (ICERD) at UniBen – Benin City.

 

(v)        Bolarinwa, M. A. and Babatope, B. – “Studies on the Effect of Cocoa pod as Filler in Polyester Composites” - presented on the 5th of Nov. 2008 at the 7th annual conference of the Materials Society of Nigeria at the Engineering Materials Development Institute (EMDI), Akure.

 

(vi)       Ogundare, O., Bolarinwa, M.A., Awodoyin, O.S., Adetunji, A. R., Olasupo, O. A., Adeyemi, O. A., Kwa, D. Y., Babatope, B. and Adewoye, O. O. – “Effect of Heat Treatment on the Mechanical Properties and Microstructure of Ductile Iron” - presented on the 5th of Nov. 2008 at the 7th annual conference of the Materials Society of Nigeria at the Engineering Materials Development Institute (EMDI), Akure. 

 

(vii)      Bolarinwa, M. A., Adetunji, A. R. and Oyawale, F. A.  – ‘‘Reliability Analysis of some Selected Hand tools using Optical Microscopy technique’’ – presented on the 30th of October, 2009 at the Metallurgical Training Institute, Onitsha.

 

(viii)    Bolarinwa, M. A. and Babatope, B. – “Effect of Cocoa Pod Particle Size Variation on the Mechanical Properties of Polyester Composites” - presented on the 16th of Dec. 2009 at the 5th International Conference & Nigerian Materials Congress (NIMACON 2009) of the African Materials Research Society (A - MRS) at the Sheraton Hotel & Towers, Abuja.

 

(ix)       Bolarinwa, M. A., Adetunji, A. R., Anamu, U. S., Oyawale, F. A. and Adewoye, O. O.  -  Structural Characterization of a clay deposit in Ijero – Ekiti, Ekiti State, Nigeria  for  furnace lining – presented at the First North African Crystallographic Conference NACC1 at Casablanca, Morocco between the 23rd and 26th November, 2010.

 

(b)    WORKSHOPS/SEMINARS ATTENDED

(i)     Feb. 27, 2007: In- House Seminar on R&D Innovation for Wealth Creation.

 

(ii)    March 14, 2007: In- House Seminar on Technology Acquisition and Intellectual Property rights.

 

(iii)    June 13, 2007: In- House Training on Solid works.

 

(iv)   June 14, 2007: In- House Training on Solid works.

 

(v)    July 3, 2007: Conference held at the Faculty of Science, Obafemi Awolowo University Ile- Ife on the Contribution of Basic and Applied Sciences to National Development.

 

(vi)       July 11, 2007: In- House Seminar on US/Africa collaboration on Organic electronics.

 

(vii)      September 13- 14, 2007: Refreshers’ course for NSE exam at O.A.U. Ile- Ife.

 

(ix)   September 18-20, 2007:  Compulsory Refreshers’ course for NSE exam at Conference centre of U.I.

 

(x)    August 24 – 26, 2010: National Training Workshop on Public Procurement of Engineering Projects organised by the Nigerian Society of Engineers at the Lagos Airport Hotel, Ikeja.