NAME: Ogunjuyigbe Ayodeji. S.O

Academic and Professional Qualifications

B.Eng.(Hons)Bensu, M.Sc. (Lagos),D.Tech. (Pretoria),., MNSE

SENIOR LECTURER

Area of Specialisation

i) Performance improvement and Analysis of Electrical machines and drives,

ii) Electric power system security and contingency planning;

Office

Department of Electrical Engineering,

Faculty of Technology,

University of Ibadan.

Tel: 00 234 (0)8023504826

Contact: aogunjuyigbe[@]mail.ui.edu.ng

Current Research Projects

COMPLETED:

• Protection assessment of Nigerian power network
• 10 year review of the Nigeria National grid collapse 
• Effect of outaging critical lines on optimal reactor location : NEPA as a case study 
• Energy loss Evaluation of power distribution system : Jericho feeder point as  a case study

(ii)         IN PROGRESS :

1. Microcontroller based Solar pumping system for Irrigation in the Remote Nigeria

2. Self Excited Reluctance generator with Non-linear loads

3. Development of GUI for the simulation of Multi-Phase Electric machines.

4. Power factor improvement techniques for Three –Phase Induction Machine      

5. Performance enhancement of Synchronous Reluctance Machine Using the split winding approach.

6. Cost-benefit analysis of a stand alone hybrid generator (Solar/wind; Solar/wind/diesel, other options)

THESIS AND DISSERTATION

(a) Improved Synchronous Reluctance Machine with Dual Stator Windings and Capacitance Injection 2009 (D.Tech)

(b) Effect of Outaging Critical Lines on Optimal Reactor Location: NEPA 1995 330 kV National Network as a Case Study (M. Sc. Thesis)

(c) Effect of Undervoltage on Squirrel Cage Induction Motor and the Design and Construction of Undervoltage Protecting Device. 1995 (M.Sc Mini project)

Floodlighting Design for Bendel State University Sports Complex 1991(B.Eng.  Thesis).

Publications

(i) Ogunjuyigbe, S.O.A and Awosope, C.O.A (2001) ; Real Mode Solution Of Load Flow Problems : Journal Of Science Engineering And Technology Vol.8 No 4.

(ii) Ogunjuyigbe, S.O.A and AWOSOPE, C.O.A (2004); Invariance of Reactor Location with Outage of Critical Lines: Journal of Applied Science and Technology. Vol. 4(1) pp. 49-54. http://ajol.info/index.php/jaset/about/

(iii) Gafar ,G.A, Ogunjuyigbe S.O.A (2007); Application of Neural Network to Load Forecasting in Nigeria Power System: PJST (Hawaii) . Vol.8 (1) pp. 68-72, May 2007. http://www.akamaiuniversity.us/PJST8_1_68.pdf

(iv) Jimoh A.A, Popoola, O and Ogunjuyigbe S.O.A (2007); Towards an Optimal Performance of Distribution Feeder, In: Proceeding International Conference on Power Systems, July 23^rd -25^th 2007, Lagos. Nigeria.

(v) Ogunjuyigbe S.O.A, Jimoh A.A and Nicolae D.V (2007); Improving Synchronous Reluctance Machine Performance by Direct Capacitance Injection through an Auxiliary Winding, In: Proceeding of the IEEE-International Conference on Electrical Machines and Systems (ICEMS 2007), paper IMP-05, pp.1055-1060. DOI:10.1109/ICEMS.2007.4411965

(vi) Ogunjuyigbe S.O.A, Jimoh A.A and Nicolae D.V (2008). Dynamic and Steady State Behavior of a Synchronous Reluctance Machine with Leading Reactive Power through an Auxiliary Winding; In: Proceeding 9^th International conference on Modeling and simulation of Electrical Machines, Converters and Systems (ELECTRIMACS 2008), Quebec, Canada. June 8-11, 2008. Paper 33-RNSC-512

(vii) Ogunjuyigbe S.O.A, Jimoh A.A and Nicolae D.V (2008). Synchronous Reluctance Machine with Controlled Capacitance Injection In: Proceeding, 11^thhttp://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=4602384 International Conference on Optimisation of Electrical and Electronic Equipment (OPTIM'08), Brasov, Romania. Pp. 39-44. May 22-24, 2008. DOI:10.1109/OPTIM2008.4602384.

(viii) Ogunjuyigbe S.O.A, Nnachi A.F, Jimoh A.A and Nicolae D.V (2008). Simulation of Six phase Induction machine split winding Induction Machine using MATLAB/SIMULINK Environment Journal of Electrical Engineering (www.jee.ro ) ‘Politehnica' Publishing House, vol. 8(3), pp. 33-39

(ix) Ogunjuyigbe S.O.A, Jimoh A.A and Nicolae D.V (2008). Test Results on Synchronous Reluctance Machine with Auxiliary winding for leading Reactive Power Injection In: Proceeding Second IASTED Conference on Power and Energy Systems (AfricaPES 2009) September 8-10, 2008, Gaborone,Botswana. https://www.actapress.com/PaperInfo.aspx?PaperID=34007&reason=500

(x) M.C. Muteba,, Jimoh A.A, Nicolae D.V and Ogunjuyigbe S.O.A (2008). Performance Evaluation of a Three-Phase Induction Machine with Auxiliary Winding Fed by a Leading Reactive Current. Second IASTED Conference on Power and Energy Systems (AfricaPES 2009) September 8-10, 2008, Gaborone,Botswana https://www.actapress.com/Abstract.aspx?paperId=34008

(xi) Ogunjuyigbe S.O.A, Obe E.S, Nicolae D.V and Jimoh A.A (2009). Synchronous Reluctance Machine with a magnetically coupled Double three-phase windings. In: Proceeding, 8^th International Symposium on Advanced Electromechanical Motion Systems, EPE chapter "Electric Drives" (ELECTROMOTION 2009), Lille, France. July 1-3, 2009. DOI: 10.1109/ELECTROMOTION.2009.5259091 http://ieeexplore.ieee.org/xpl/tocresult.jsp?isnumber=5259072&isYear=2009

(xii) Ogunjuyigbe S.O.A, Jimoh A.A and Nicolae D.V (2007); Performance Enhancement of Synchronous Reluctance Machine Using Split Winding and Capacitance Injection, In: Proceedings of IEEE-Africon 2007, pp.1-7, Namibia. DOI: 10:1109/AFRICON.2007.440155.

(xiii) Ogunjuyigbe S.O.A, Jimoh A.A and Nicolae D.V (2008). Controlled Capacitance Injection through an Auxiliary Winding for Performance Enhancement of Synchronous Reluctance Machine. In: Proceeding, 11^th International Conference on Optimisation of Electrical and Electronic Equipment (OPTIM’08), Brasov, Romania. Pp. 39-44. May 22-24, 2008.  DOI:10.1109/OPTIM2008.4602384.

Recommended Links

(1) http://ieeexplore.ieee.org/

(2) www.tut.ac.za